Instruction Manual: Hot Tub
24
Figure 12: Bearing surface (coloured red)
The following specifications for the installation site must be observed:
•
For the 180 hot tub:
3 m x 3 m bearing surface (see also
Figure 8
)
•
For the 200 hot tub:
3.50 m x 3.50 m bearing surface (see also
Figure 9
)
•
A bearing surface of approx. 2m x 3m for the “OPAL” hot tub
•
Compacted and completely level ground that can permanently withstand the tonnage
of a hot tub filled with water and occupied by bathers (at least 2 tonnes).
•
You must be able to ventilate the smoke
•
In very cold regions, we recommend that you use an optional heater (see Item 22 as per
Figure 5
)
•
Sufficient distance to flammable objects or equipment
•
Provide a protective plate under and in front of the stove if the surface is combustible.
The following
Figure 13
is a visual representation of an installation site that meets the specifications listed above.
