1 / 2
PM02 is a simple way of providing your APM and Pix32 with clean power from a LiPo battery
as well as current consumption and battery voltage measurements, all through a 6-pos cable.
The on-board switching regulator outputs 5.2V and a maximum of 3A from up to a 10S LiPo
battery. The Power Module comes completely assembled with XT60 connectors, and wrapped
in shrink tubing for protection.
The Power Module is designed to power APM,Pix32, a RC receiver and APM accessories (GPS,
radio). It is not designed to power servos. Use your aircraft's own ESC/BEC for that.
The GH terminal is also compatible with both Pixhawk4 and Pixhawk4 mini.
Spec
：
Max input voltage: 42V
Max current sensing: 120A
Voltage and current measurement configured for 5V ADC
Switching regulator outputs 5.2V and 3A max
Weight: 20g
Package Include
：
PM02 board*1
6pin MLX cable *1
6pin GH cable *1
