Rev. 1.00
8
December 13, 2018
Rev. 1.00
9
December 13, 2018
Gang-Writer8-8 User’s Guide
Gang-Writer8-8 User’s Guide
3.2 Programming Mode Selection
Standard Mode
2, 4, 6 or 8 site parallel programming can be selected by the OPTION S/W settings, as shown in
Figure 11.
Figure 11. Programming Mode Selection – Standard Mode
Extension Mode
In the offline programming mode, if the base board works together with 4 programming modules, up
to 16 Holtek 8-bit Flash MCUs can be programmed in parallel as shown in Figure 12.
