Rev. 1.00
�
�a� 1�� �01�
Rev. 1.00
�
�a� 1�� �01�
e-Link for 8-Bit MCU ICP User’s Guide
e-Link for 8-Bit MCU ICP User’s Guide
1. e-Link Introduction
The e-Link is Holtek’s third generation simulator/programmer for use with Holtek Flash MCU
devices. It includes both OCDS (On-Chip Debug Support) and ICP (In-Circuit Programming)
functions.
2. e-Link Appearance and ICP Functions
2.1 e-Link Appearance
e-Link is the common name for the Holtek simulator/programmer hardware series all of which have
the same appearance as shown below.
Figure 1. e-Link – Front
Figure 2. e-Link – Back
11
9
7
�
�
1
1�
10
8
6
4
�
Figure 3. e-Link – Side
Figure 4. e-Link – Pin Assignment
2.2 e-Link ICP Functions
•
Programming Holtek 8-bit Flash MCUs
•
Programming EEPROMs
•
Programming SPI Flash
