Page 2
Type 6.5.0.3-RF
ASCII Connection to Crestron or HAI 400
NO COM NC
NO COM NC
Red Green LED control
Gate Control
Automation System Relays
(Typical of Crestron or HAI)
To gate control
HAI
To Automation System
(see details below)
Crestron
B
la
ck
to
p
in
5
W
hi
te
to
p
in
2
Crestron Serial Port
Z1
- - - -
Z2
Z3
Z4
Z5
GRD
12V Switched
12V AUX
24VAC
- - -
To HAI serial port:
RJ-11 Black = pin 1 White = pin 4 (RJ-11 is 4 pin)
RJ-25 Black = pin 2 White = pin 5 (RJ-25 is 6 pin)
Black
Black to “Grnd”
White
Viewed with ‘’tit’’ up
Black
Green
The red LED is normally on all of the
time. When a valid code is entered, the
relay controlling the LEDs would close,
and the green light would go on
(momentarily). Note, this relay must be
programmed in Crestron or HAI in order
for this to take place.
K1-26I
ASCII Keypad
12vDC
1.5A
