HOLOPLOT MD80-S, User

Page: 38 / 45

38 X1 MD80-S Manual 1.0 en
The MD80-S has two AC Power IN
connections. All power sources shall
be disconnected before servicing to
avoid shock hazard.
TURNING OFF THE AUDIO MODULE
The Audio Module does not integrate a power switch. In
order to safely power down the system, simply switch off
the main power source the Audio Module is connected to.
The Amphenol HP Series 25 power
connectors do not have breaking
capacity. Therefore, do not connect
or disconnect under load.
Operating the X1 Modul 80-S
BLINKING
HOLOPLOT Control allows the user to light up the four
LEDs located at the front of the Loudspeaker Cabinet. This
allows for easy locating of Audio Modules within the venue.
To light up the LEDs, click the “Blink” icon ( ) next
to an Audio Module or HOLOPLOT Matrix Array in
HOLOPLOT Control .
ACCESSING HOLOPLOT CONTROL
There are two options to access HOLOPLOT Control :
• Enter https://holoplot.local/ in the address bar of
your web browser.
• In HOLOPLOT Plan , once a connection to the
HOLOPLOT Audio System has been established,
follow
File > Open Controller Interface . This will open
the Web Interface in your default web browser.
Both options require an active connection to the local
control network.
UPDATING
Software Updates for a HOLOPLOT Audio System are
pushed via the cloud-based HOLOPLOT Connected
Services to the HOLOPLOT Controller which distributes
and facilitates the update for all HOLOPLOT devices
within the local network. The update process is started
by the user via
HOLOPLOT Control . Once an update
becomes available, click the “Update” button in the
“System Summary” block. This starts an automated
update process. The HOLOPLOT Controller will update
itself, reboot, and eventually update the Audio Modules.
i
The HTTPS certificate on
https://holoplot.local/ is a so-called
self-signed certificate. The browser
will display a warning about this,
but it is safe to proceed.