Hologic ThinPrep, Operator'S Manual, Page: 81 / 230

O
PERATION OF THE
I
MAGER
D
UO
3
Imager Duo Operator’s Manual 3.15
SLIDE PROCESSING
1. Start the slide processing operation by using the mouse to perform either of
the following:
a. At the top of the display, position the cursor on the green GO button
and click once.
Figure 3-15 Begin Slide Processing - Go Button
OR
b. At the top of the menu bar, select Slide Processing and then in the drop-
down menu, click once on Start Slide Processing.
Figure 3-16 Begin Slide Processing - Menu Selection
2. The doors will lock. The message “Currently Processing” is displayed on
the monitor.
SECTION
G