manualshive.com logo in svg

Hologic ThinPrep 5000, Operator'S Manual, Page: 270 / 346

Share
Download
Hologic ThinPrep 5000 Operator'S Manual Download Page 270

M

AINTENANCE

8.14

ThinPrep™ 5000 Processor with AutoLoader Operator’s Manual

8

 Figure 8-15   Waste System Leak Test

Press the 

Done

 button when complete.

Waste Bottle Connection

The waste bottle will be connected to the system at the time the instrument is installed. However, if 
the waste bottle and the tubing harness should be removed entirely (for overall replacement, 
replacement of the waste filter, cleaning, etc.) the following steps describe connecting the tubing 
correctly.

1. The waste bottle is located inside the waste cabinet door of the AutoLoader cart. If for some 

reason, the waste bottle is relocated outside of the cabinet, the waste bottle should be placed at 
the same height or below the ThinPrep 5000 processor. Do not place the waste bottle above the 
instrument.

2. Ensure that the waste bottle cap is tightly secured. The waste bottle must rest in an upright 

position. Do not allow the waste bottle to lay on its side.

3. Locate the three waste bottle connections at the rear of the ThinPrep 5000 processor. Refer to 

Figure 8-16. Ensure that the buttons of the connectors are in the down/inward position.

Summary of Contents for ThinPrep 5000



























































































































































































































































































































































Reviews:

No comments