Hologic ThinPrep 5000, Operator'S Manual, Page: 161 / 346

ThinPrep™ 5000 Processor with AutoLoader Operator’s Manual
6.27
6
U
SER
I
NTERFACE
Lab Name
Figure 6-31 Set Lab Name Button
To enter or edit a name for the facility at which the instrument is located, press the Lab Name button.
Press the letter buttons to enter a name, up to 20 characters long. (Long names that use wide letters
may appear cut off on the display, but 20 characters are accepted in the field and will print on the
reports.)
Refer to Figure 6-32. To create a capital letter, press the Shift button and then press the letter. With the
next letter, the system reverts to lowercase. Use the Space button for a space and the Delete button to
remove entered letters.
Press the abc/123 button to display a keypad screen to enter numbers and characters. Use the Alt key
to enter characters on the top row. Switch between keyboard and keypad as often as desired before
saving changes.
Lab Name button shows
current setting