Hologic AQL-100, Instructions For Use And Operator'S Manual

Page: 17 / 302

System Operation
13
EN
5 System Operation
5.1 Front of Pump
Please familiarize yourself with the layout of the individual elements on the front
of the pump.
5.2 Rear of Pump
Please familiarize yourself with the layout of the individual elements at the rear
of the pump.
CAUTION!
Any devices to be connected via the interface have to comply with EN 60950.
Figure 5-1 Front of Pump
(1) Pump display
(2)
Intrauterine pressure display
(3) Fluid deficit limit
(4)
Deficit meter
(5) Deficit display
(6)
Inflow tube holder
(7) Roller wheel
(8)
Pressure sensor
(9) Reset deficit button (Zero)
(10)
Decrease deficit limit
(11) Increase deficit limit
(12)
Decrease intrauterine pressure set-
ting
(13)
Increase intrauterine pressure set-
ting
(14)
Intrauterine pressure setting dis-
play
(15)
ON/OFF switch
(16) Pause/Resume button
(17)
Prime button
(11)
(1) (2) (3)
(7) (4) (5) (6)
(8)
(9)
(10) (13)
(16)
(17)
(15)(14) (12)
Figure 5-2 Rear of Pump
(1)
Low vacuum port (white)
(2)
Product ID label
(3)
Device performance data
(4)
Adjustment dial for high vacuum
(5)
High vacuum port (green)
(6)
Fuse holder(s)
(7)
Power cord connection
(8)
MyoSure® Control Unit Power Con-
nection
(9)
Potential equalization connector
(10)
Service interface
(11)
Scale connection
(12)
Exhaust ports
(6)
(5)
(4)
(9)
(1)
(2) (3)
(7) (8) (10)
(11) (12)
(12)