Hologic Affirm, User Manual

Page: 33 / 70

Affirm User Guide
Chapter 4: How to Use the System
MAN-03209 Revision 005 Page 23
4:
How to Use the System
4.1 System Verifications
4.1.1 Confirm the Host Connection
When the Selenia Dimensions is On and the Affirm cable connections are correct, the
Home screen shows on the Biopsy Control Module.
Figure 11: Home Screen on the Biopsy Control Module
4.1.2 The QAS Test
Each day that you plan to use the system, do this test one time to confirm the system
accuracy. Record your results in the
QAS Test Checklist on page 53.
Note
You can use Auto C-Arm Stereo Mode or Manual C-Arm
Stereo Mode for the QAS Test. For more information about
these modes, refer to
C-Arm Stereo Modes on page 35.
Chapter 4: