3
TYPICAL SETUP
①
②
⑤
③
④
⑥
Install the SUS reinforced pad on the supporting plate and fix them by 4 screws.
Fix the supporting plate on the panel antenna by 4 screws.
Fix the assembled parts on a tripod through the 3/8 hole on the SUS reinforced pad.
①
②
③
④
⑤
⑥
Install the battery on the receiver.
Connect the five ports on the panel antenna with the five antenna interfaces on
the receiver by the NJWC-SMA coaxial connection cables and slightly
tighten the connections by hands.
Align the installation hole on the bottom of the receiver with the installation hole
of the supporting plate and fix them by an ¼ slotted C-ring hand screw.