hollu EM 143, Use And Maintenance

Page: 31 / 52

ENGLISH
- 7
6.1.b - Starting the machine (Fig. 21)
WARNING:
Some machine models have two speed
settings.
In this case, select the desired speed be-
fore turning on the machine.
DANGER:
Ensure your hands are dry before using the
appliance.
- Pull up the lever (54) and lower the han-
dle until it reaches the height of the hips
(maximum balance position).
- Press the button (56) to release the brush
rotation start levers (52).
- Pulling the levers (52) starts the machine.
- When both levers (52) are released, the
machine stops.
WARNING:
Never wrap the power cable around the
neck or body of the machine.
6.1.c - Using the machine
(Figs. 21 and 23)
- After starting the machine, begin cleaning
by keeping the levers (52) pressed, thus
keeping the machine running and brush
rotation active.
- The machine must be used creating small
arches with the operator in the middle.
- The traverse, which is the natural drift of
the machine, is obtained by pressing or
lifting the machine grip.
Pulling or lifting the grip slightly makes
the machine move to the right.
Pressing or gently lowering the grip
makes the machine move to the left.
Slightly twisting the right-hand side of the
grip makes the machine move forward.
Slightly twisting the left-hand side of the
grip makes the machine move backward.
N.B.:
Move the grip gently in order to achieve man-
ageable machine movements.
- To keep the machine running at a certain
point, simply hold the grip in the starting
position.
N.B.:
Using the machine in a fixed position while the
brushes are rotating for a prolonged time can
cause damage to the floor.
- For machines equipped with an optional
tank, adjust the water supply using the le-
ver (64).
N.B.:
When the levers (52) are released, brush rota-
tion stops and the machine is turned off.
6.1.d - Double speed (if present)
(Fig. 24)
- For some models, it is possible to select
the brush or pad holder rotation speed:
- Standard speed
- Double speed
N.B.:
Select the desired speed before starting the
machine.
Manuale HU30-923_HOLLU_EM143 EM143 DS_1ed_07-2019.indd 7 16/07/2019 08:10:53