7. Task-Oriented Procedures
47
To adjust the inclination of the armrest:
1. Turn the armrest inclination adjustment wheel clockwise to raise the armrest, and turn it
counterclockwise to low the armrest.
Note:
The air-sprung driver's seat adjusts automatically to an operator's weight when the
operator is in the driver's seat.
Wearing seat belt
This procedure provides instructions on how to wear the seat belt.
Warning:
The seat belt must be fastened properly, as shown on the picture.
To fasten the seat belt:
1. Pull down the seat belt and ensure that the seat belt is not damaged.
2. If needed, adjust the seat belt.
3. Insert the seat belt latch into the buckle and push it down to fasten. When the seat belt latch locks
into the buckle, you will hear an audible click sound.
4. Ensure that the belt fits tightly and not twisted.
5. Ensure that the shoulder strap is positioned midway over your shoulder across your collar bone.
6. Ensure that the lap strap is positioned correctly, below the abdominal area.
To release the seat belt:
1. Press the release button in the locking buckle. The belt automatically draws back to the retractor.
Heating driver's seat
This procedure provides instructions on how to heat the driver's seat. This option is available if the
winter package is installed on the tractor.
To heat the driver's seat:
1. Ensure that the engine is running.
2. Turn on the seat heater switch.
