Holder Tractor C992, Operating Manual, Page: 122 / 129

13. Appendix
113
Appendix 1. Engine, drive unit, and fuel system data
manufacturer Deutz AG
model designation TD2011 L04w
exhaust level EU level III A
design vertical in-line
mode of operation four-stroke diesel
cooling liquid
injection method direct
number of cylinders 4
cylinder bore 96 mm
stroke 125 mm
displacement 3619 cm
3
compression ratio 1:18
maximum charge pressure 1.4 bar / 20 psi
valve clearance with cold engine intake valve 0.3 mm; exhaust valve 0.5 mm
specific fuel consumption 232 g/kWh
air filter Mann & Hammel dry air filter with acoustic warning system
lubrication system pressurized lubrication
lubrication oil consumption maximum 0.5% of fuel consumption
oil filter replaceable cartridge in main circuit
oil pressure at n = 900 rpm 1.5 bar / 22 psi
rated speed 2600 rpm
upper idling speed 2600 + 200 rpm
lower idling speed 900-950 rpm
maximum torque as per 97/68 EC 280 Nm at 1600 min
-1
/ 85.3 hp
power as per 97/98 EC at 2600 rpm 68.0 kW / 91 hp
Table 13-1. Engine
injection pump motorpal single plug-in pump unit
Table 13-2. Fuel system