Black plate (13,1)
Holden Volt Owner Manual (Holden-Localizing-Holden-7337564) - 2014 -
CRC - 11/8/13
Instruments and Controls
5-13
and/or chime, remove the object
from the seat or buckle the
seat belt.
Second Row Passenger Seat
belt Reminder Light
Second row seating positions
monitored for seat belt use are
represented by a coloured symbol
indicating seat belt status.
When the vehicle is started, two
seat belt symbols come on and stay
on for several seconds in the
instrument cluster to alert the driver
that passengers may need to fasten
their seat belts. After the passenger
seat belt is buckled, the
corresponding seat belt symbol in
the instrument cluster turns green.
If a seat belt is not initially buckled,
the instrument cluster displays a
grey seat belt symbol.
While the vehicle is moving, if a
second row passenger who was
previously buckled becomes
unbuckled, the corresponding seat
belt symbol will change to flashing
red and a chime may sound.
Airbag Readiness Light
This light shows if there is an
electrical problem with the airbag
system. The system check includes
the airbag sensor(s), the
pretensioners, the airbag modules,
the wiring, and the crash sensing
and diagnostic module. For more
information on the airbag system,
see
The airbag readiness light comes on
for several seconds when the
vehicle is started. If the light does
not come on then, have it fixed
immediately.
{
Warning
If the airbag readiness light stays
on after the vehicle is started or
comes on while driving, it means
the airbag system might not be
working properly. The airbags in
the vehicle might not inflate in a
crash, or they could even inflate
without a crash. To help avoid
injury, have the vehicle serviced
right away.
If there is a problem with the airbag
system, a Driver Information Centre
(DIC) message may also come on.
See
.
