HOLDEN Volt 2014 Owner'S Handbook Manual Download | Manualshive

Page: 236 / 377

background image

Black plate (12,1)

Holden Volt Owner Manual (Holden-Localizing-Holden-7337564) - 2014 -

CRC - 11/8/13

9-12

Driving and Operating

{

Caution

Service Only Mode will discharge
the 12-volt battery. Do not use
Service Only Mode for an
extended period, or the vehicle
may not start.

STOPPING THE VEHICLE/OFF:

To turn the vehicle off, press the
POWER

O

button with the vehicle

in P (Park). Retained Accessory
Power (RAP) will remain active until
the driver door is opened. See

Retained Accessory Power (RAP)
on page 9-14

. When turning off the

vehicle, if the vehicle is not in
P (Park), the vehicle will go to ACC/
ACCESSORY and display the
message SHIFT TO PARK in the
Driver Information Centre (DIC).
See

Electric Drive Unit Messages

.

The vehicle may have an electric
steering column lock. The lock is
activated when the vehicle is
switched to off and either front door

is opened. A sound may be heard
as the lock actuates or releases.
The steering column lock may not
release with the wheels turned off
centre. If this happens, the vehicle
may not start. Move the steering
wheel from left to right while
attempting to start the vehicle. If this
does not work, the vehicle needs
service.

If the vehicle must be shut off in an
emergency:

1. Brake using a firm and steady

pressure. Do not pump the
brakes repeatedly. This may
deplete power assist, requiring
increased brake pedal force.

2. Shift the vehicle to N (Neutral).

This can be done while the
vehicle is moving. After shifting
to N (Neutral), firmly apply the
brakes and steer the vehicle to a
safe location.

3. Come to a complete stop, shift

to P (Park), and turn the vehicle
off by pushing the POWER

O

button.

4. Set the parking brake. See

Electric Parking Brake on
page 9-25

.

{

Warning

Turning off the vehicle while
moving may disable the airbags.
While driving, only shut the
propulsion system off in an
emergency.

If the vehicle cannot be pulled over,
and must be shut off while driving,
press and hold the POWER

O

button for longer than two seconds,
or press twice in five seconds.

Starting and Stopping the
Vehicle

Starting Procedure

Move the shift lever to P (Park) or
N (Neutral). The propulsion system
will not start in any other position.

«
...
234
235
236
237
238
...
»

Summary of Contents for Volt 2014


























































































































































































































































































































































































Reviews:

No comments

Related manuals for Volt 2014

Brand: AAMP of America Pages: 6

Brand: Parrot Pages: 19

Brand: Parrot Pages: 88

Brand: Parrot Pages: 2

Brand: Parrot Pages: 2

CK 3000 Evolution

Brand: Parrot Pages: 8

CK 3000 Evolution

Brand: Parrot Pages: 106

Brand: Warrior Products Pages: 3

Reference Series

Brand: OEM Audio Pages: 29

iBoard IB-ZK406

Brand: APS Auto Parts Specialist Pages: 3

Brand: Brodit Pages: 2

Brand: Power Fist Pages: 12

Brand: EAL Pages: 7

Brand: Ironton Pages: 7

Gold Cruuse Cruisecontrol GC90

Brand: John Gold Pages: 24

Brand: Whispbar Pages: 14

Brand: PEUGEOT Pages: 249

Carpower CAP-20

Brand: Monacor Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands