Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
Driving and Operating
213
The HDC light displays on the
instrument cluster when enabled.
HDC can maintain vehicle speeds
between 3 and 22 km/h on an
incline greater than or equal to a
10% gradient. A blinking HDC light
indicates the system is actively
applying the brakes to maintain
vehicle speed.
When HDC is activated, the initial
HDC speed is set to the current
driving speed. It can be increased or
decreased by prRES or
–
SET on the steering wheel or by
applying the accelerator or brake
pedal. This adjusted speed
becomes the new set speed.
HDC will remain enabled between
22 and 60 km/h; however vehicle
speed cannot be set or maintained
in this range. It will automatically
disable if the vehicle speed is above
80 km/h or above 60 km/h for at
least 30 seconds. Press
5
again to
re-enable HDC.
Cruise Control
The cruise control:
.
Maintains the vehicle's speed
without pressing the accelerator
.
Will only operate at speeds
above 40 km/h
.
Switches are located on the
steering wheel.
{
Warning
Do not use the cruise control
when road or driving conditions
require varying speeds.
A constant speed is not practical
in heavy or varying traffic or on
winding, slippery or rough roads.
Remember that when
I
illuminates green, the cruise
control is maintaining the
vehicle's speed. Taking your foot
off the accelerator pedal does not
reduce the speed. To deactivate
(Continued)
