Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -
2017 - crc - 6/29/16
72
Instruments and Controls
Safety Belt Reminders
>
for driver's seat illuminates or
flashes red.
When the ignition is switched on,
this control indicator is activated and
remains active for some seconds, to
remind the driver to fasten the
seat belt.
Soon after the ignition is switched
on or the engine is started, the
control indicator begins to flash, and
also a chime sounds, for a few
seconds. Then the control indicator
stops flashing and illuminates until
the driver seat belt is fastened.
Additionally, if the driver remains
with the seat belt unfastened while
the vehicle is moving, after reaching
a specific distance or speed, a
chime sounds and the control
indicator flashes for several
seconds.
If the driver seat belt is already
fastened, neither the control
indicator nor the chime comes on.
See
If Seat Belt Reminder is active the
Rear Parking Assistance chime will
not operate.
Passenger Safety Belt
Reminder (If equipped)
C
for passenger's seat illuminates
or flashes red.
When the vehicle is started this light
flashes and a chime may sound to
remind passengers to fasten their
seat belt. Then the light stays on
solid until the belt is buckled.
This cycle continues several times if
the passenger remains or becomes
unbuckled while the vehicle is
moving.
If the passenger seat belt is
buckled, neither the chime nor the
light comes on.
The front passenger seat belt
warning light and chime may turn on
if an object is put on the seat such
as a briefcase, handbag, grocery
bag, laptop, or other electronic
device. To turn off the warning light
and/or chime, remove the object
from the seat or buckle the
seat belt.
Rear Passenger Safety Belt
Reminder (If equipped)
>>>
for rear passenger's seat
appears on Driver Information
Center.
When the ignition is turned on, the
symbols will be displayed in the
lower part of the DIC. If a rear seat
belt is buckled, the corresponding
symbol will dim.
