manualshive.com logo in svg

HOLDEN Colorado MY17 RG, Owner'S Manual

The HOLDEN Colorado MY17 RG Owner's Manual is now available for free download on manualshive.com. This comprehensive manual provides essential information and instructions for operating and maintaining your vehicle. Get the most out of your HOLDEN Colorado experience with this user-friendly manual that covers every aspect of your vehicle's features and functions.

Share
Download
background image

Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -

2017 - crc - 6/29/16

Driving and Operating

195

If the battery is discharged, start the
vehicle using jump leads. See

Jump

Starting

0

262

.

If the battery is not the cause of the
fault, release the selector lever and
remove the ignition key from the
ignition switch/lock.

Release Selector Lever

To shift out of

P

:

1. Apply the brake pedal.

2. Open the cover.

Note

Use a small screwdriver to prise the
cover off at both ends.

3. Insert a screwdriver into the

slot until the selector lever is
unlocked.

4. Move the selector lever to

position

N

.

5. Remove the screwdriver.

6. Close the cover.

7. Have the vehicle repaired by a

Holden Dealer as soon as
possible.

Drive Systems

Four-Wheel Drive

If the vehicle has four-wheel drive,
you can send the engine driving
power to all four wheels for extra
traction.

To get the best performance out of
four-wheel drive, you must be
familiar with its operation. You
should use two-wheel drive high for
most normal driving conditions.

Note

Driving on clean, dry pavement in
four-wheel drive for an extended
period of time can cause premature
wear on the vehicle drivetrain.

Note

Do not engage four-wheel drive if
wheels of different sizes are fitted
as damage to the vehicle can result.
The repair would not be covered by
the warranty.

Note

An incorrect usage of the four-wheel
drive may damage the system. Use
four-wheel drive only on tracks with

Summary of Contents for Colorado MY17 RG











































































































































































































































































































Reviews:

No comments

Related manuals for Colorado MY17 RG

Acdeos AXS FL Installation Instruction preview
AXS FL
Brand: Acdeos Pages: 7
Q'STRAINT QLK-150 Installation Instructions Manual preview
QLK-150
Brand: Q'STRAINT Pages: 10
CITROEN C8 NaviDrive Manual preview
C8 NaviDrive
Brand: CITROEN Pages: 52
Mini COOPER Owner'S Manual preview
COOPER
Brand: Mini Pages: 20
Right Weigh 221-SK Installation Manual preview
221-SK
Brand: Right Weigh Pages: 16
Hama 00 123530 Operating Instructions preview
00 123530
Brand: Hama Pages: 4
Volvo 1992 850 Service And Repair Manual preview
1992 850
Brand: Volvo Pages: 230
Dodge 2005 JR41 Stratus Owner'S Manual preview
2005 JR41 Stratus
Brand: Dodge Pages: 293
Edelbrock 2917 Nstallation Instructions preview
2917 Nstallation
Brand: Edelbrock Pages: 1
Magneti Marelli Obd Road User Manual preview
Obd Road
Brand: Magneti Marelli Pages: 9
Curt Group 60638 Installation Manual preview
60638
Brand: Curt Group Pages: 3
Juna JRDAB-03 Installation Manual preview
JRDAB-03
Brand: Juna Pages: 10
Rugged Ridge 13551.33 Manual preview
13551.33
Brand: Rugged Ridge Pages: 3
Metra Electronics 99-6510 User Manual preview
99-6510
Brand: Metra Electronics Pages: 17
Yakima K1043 Manual preview
K1043
Brand: Yakima Pages: 10
Jeep 2014 All vehicles Warranty Information Booklet preview
2014 All vehicles
Brand: Jeep Pages: 44
Jackson Racing 999-200 Installation Instructions Manual preview
999-200
Brand: Jackson Racing Pages: 14
Lincoln MKZ HYBRID 2016 Quick Reference Manual preview
MKZ HYBRID 2016
Brand: Lincoln Pages: 10

Brands by name

Popular brands

Load more brands