FM-ONE
HOKUTO DENSHI
CO;LTD;
株式会社
22
About programming onto V850・78K0・78K0R・RL78 series
It
’s possible to program onto devices(shown as below)with an optional conversion unit.
In connecting with the recommendation circuit of each series, the following conversion units are necessary.
Format
…
MOT/HEX
new elements will be added.
【
Outlines of each unit
】
(V850,78KO,78K0R,RL78Series)
Cable
Name
20-16pin V850
20-16pin 78K0
20-16pin 78K0R SINGLE WIRE
20-14pin RL78 SINGLE WIRE
Conversion
unit
20<->16pin V850
20<->16pin 78K0
20<->16pin 78K0R SINGLE WIRE
20<->14pin RL78 SINGLE WIRE
Included
－
16pins straight cable
is attached
16pins straight cable is attached
14pins straight cable is attached
Usage
-
-
Connecting to QB-MINI2 connector
*1
Connecting to E1 or E20 emulator
*2
Group of
supported
MCU
V850ES/Jx2,Jx3-L
V850E/Ix3
V850E2/Mx4,Sx4-H
78K0/Kx2
78K0R/Kx3
V850E2/Mx4,Sx4-H
RL78/G10, G12,G13,G14,G1A,G1C
RL78/I1A
RL78/L12,L13
Price
¥2,000
¥5,000
¥5,000
¥5,000
*1
Please refer to
“QB-MINI2 user’s manual” for this pin assignment to each MCU.
*2
Please refer to
“E1 emulator user’s manual” or “E20 user’s manual” for this pin assignament for each MCU.
how to connect
（
conversion unit only
）
how to connect
（
with 16pin or 14pin straight cable
）
Before using RL78 family MCU
If the setting prohibited number is set at the option byte (000C2H), programming would be failed.
Please try again if failed.
Conversion unit
FM-ONE
Target board
Attached cable
Attached cable
Conversion unit
FM-ONE
16pin or 14pin cable
Target board