FM-ONE
HOKUTO DENSHI
CO;LTD;
株式会社
20
About programming onto R8C・M16C・M32R・R32C series
It
’s possible to program onto devices(shown as below)with an optional conversion unit.
Format
…
MOT/HEX
new elements will be added.
【
Outlines of each unit
】(R8C/M16C Series,R8C Series)
Cable Name
20-10pin F
O
USB
20-14pin R8C
*1
20-14pin R8C
SINGLEWIRE FASTEST
*2
Conversion unit
20<->10pin F
O
USB
20<->14pin R8C
20<->14pin R8C SINGLE WIRE
Included
10pins straight cable is attached
14pins straight cable is attached
14pins straight cable is attached
Specification
Connecting to
USB Writer and
M16C Flash Starter
*
3
Connecting to Emulator E8a
*4
Connecting to Emulator E8a
*4
Writing with single wire serial
Group of
supported MCU
R8C/10
～
13,
R8C/18,19,1A,1B
R8C/20
～
29
R8C/2A,2B,2C,2D
R8C/2E,2F,2K,2L
R8C/32A,32C,32D,32G,32H
R8C/32M,33A,33C,33D,33G
R8C/33H,33M,33T,34C,34E
R8C/34F,34G,34H,34K,34M
R8C/34P,34R,34U,34W,34X
R8C/34Y,34Z,35A,35C
R8C/35D,35M,36A,36E,36F
R8C/36G,36H,36M,36W,36X
R8C/36Y,36Z,38A,38C
R8C/38E,38F,38G,38H,38M
R8C/38W,38X,38Y,38Z
R8C/3GA,3GC,3GD
R8C/3JA,3JC,3JT
R8C/3MK,3MU,3MQ
R8C/36T-A
R8C/54E,54F,54G,54H
R8C/56E,56F,56G,56H
R8C/L35A,L35B,L35C,L35M
R8C/L36A,L36B,L36C,L36M
R8C/L38A,L38B,L38C,L38M
R8C/L3AA,L3AB,L3AC,L3AM
R8C/LA3A,LA5A,LA6A,LA8A
R8C/LAPS
R8C/M11A,M12A,M13B
M16C/26,26A,28,29,1N
M16C/30P,57,5M,5L
M16C/62P,62A,62N,62M
M16C/63,64,64A,65
M32C/83,84,85,86,87
R32C/111,116,118,120,121
R32C/152,153,156
R8C/10
～
13
R8C/14
～
19,1A,1B
R8C/20
～
29
R8C/2A,2B,2C,2D,2H,2J
R8C/2E,2F,2K,2L
R8C/32A,32C,32D,32G,32H,
R8C/32M,33A,33C,33D,33G,
R8C/33H,33M,33T,34C,34E
R8C/34F,34G,34H,34K,34M
R8C/34P,34R,34U,34W,34X
R8C/34Y,34Z,35A,35C
R8C/35D,35M,36A,36C,36E
R8C/36F,36G,36H,36M,36W
R8C/36X,36Y,36Z,38A
R8C/38C,38E,38F,38G
R8C/38H,38M,38W,38X,38Y
R8C/38Z
R8C/3GA,3GC,3GD
R8C/3JA,3JC,3JT
R8C/3MK,3MU,3MQ
R8C/36T-A
R8C/54E,54F,54G,54H
R8C/56E,56F,56G,56H
R8C/L35A,L35B,L35C,L35M
R8C/L36A,L36B,L36C,L36M
R8C/L38A,L38B,L38C,L38M
R8C/L3AA,L3AB,L3AC,L3AM
R8C/ LA3A,LA5A,LA6A,LA8A
R8C/LAPS
R8C/M11A,M12A,M13B
Price
¥2,000
¥2,000
¥5,000
Notes:
*1
Please output TX and RX to program.
*2
Project File Maker needs to be newer than 1.0.0.4.
Verify-checksum is not available with single wire connection.
*3
Please refer to MCU hardware manual for
examples of connection Serial Programmer and MCU.
*4
Please refer to
“E8a Emulator user’s manual” for this pin assign.
Please use programming tools with appropriate version of control software.
Please refer to the instruction manual for each connection on the target board.