FM-ONE
HOKUTO DENSHI
CO;LTD;
株式会社
19
Parameters
to be displayed
※
For detailed set values, refer to A1.
Page
Items
Set values
Communication setting
BOOT
Async
Sync
1200/2400/4800/9600/19200
1200/2400/4800/9600/19200/38400/76800*1
NONE/10K/25K/50K/100K/250K/500K/1M/2M
Pin setting & Option
Pin
Vrify
FFskip
FWE/MD0/MD1/IO0/IO1/IO2
NONE/CSUM/BYTE
YES/NO
Clock & Clock mode/CKM
CLK MODE
XTAL
CKM
（
Value displayed when CF saved
）
Alter by up-down button*2
（
Value displayed when CF saved
）
Alter by up-down button*2
（
Value displayed when CF saved
）
Alter by up-down button*2
CKP & Program names
display
CKP
USER 1
USER 2
(Value displayed when CF saved) Alter by up-down button
HDU file displayed Alter by up-down button
HDU file displayed Alter by up-down button
MCU type & laubguage
MCU
LANGUAGE
(Selection displayed when CF saved) Cannot select.
(Selection displayed when CF saved) Alter by up-down button.
*1 Set values more than selected rate
are displayed. *2 Alteration is
not possible by MCU.
CAUTION!
Project is displayed under the folder name. Note that if the wrong HDP file name is entered in the
folder, confirmation is not possible.
Don’t take out CF when Access lamp is on as saved data may be destroyed.
Don
’t use the converted user’s file HDU on other MCU as ROM areas cannot be confirmed.
CAUTION!
If CANCEL button is pushed three times consecutively on the Project selection screen, functions other
than Write and Cancel are blocked.
A key symbol before a letter tells that switch operation is blocked.
To unlock, push CANCEL button three times.
Specific MCU
How to write in external memory of ROMless articles
Writing is possible to external Flash ROM extended on the following ROMless MCU.
Corresponding
MCU
H8SX/1650, H8SX/1651
or equivalents
Standard external ROM
MBM29LV800BA-70
（
Fujitsu
）
*TC58FVM5T2AFT-65(TOSHIBA),S29GL032M90TFIR4
（
SPANSION
）
finished the confirmation
Writing method
Normal writing is possible
.
Writing control program to external memory differs depending on external memories to be use.
Contact us
as needed on how to convert protocols different from the standard source, and we will explain according to
the specification.
For the target interface, refer to H8SX/1650 Material edition of
User’s Manual.
What cannot be done with a special MCU.
Writing in H8/3664N Stack EEPROM varies depending on an external memory to be used.
*If writing is not done in Stack EEPROM, you can make FF skip.
FM－ONE dose not delete Stack EEPROM. FF skip is chosen, FF area remains the previous data, resulting in a
verify error.
When entering values into the target clock in H8S/2172F, enter the twice as the values of the populated
clock. Writing is not possible thorough clock synchronized communication.
FM-ONE System 2.4V
Folder
DEFAULT
Date
05/01/01
Time
00:00:00
This is a display of the body when
blocked
.