FM-ONE
HOKUTO DENSHI
CO;LTD;
株式会社
9
Fundamental Write-in Method
FM
－
ONE writes User Programs from project files saved in CF.
Writing can be started in two ways: one is done directly from FM
－
ONE Project File Maker, and the other is by operating the
write switch of the FM
－
ONE body.
Fundamental Write-in Method
【
Online
】
With FM
－
ONE Project File Maker:
A1: Save/Load
・・・
To produce project files into PC and CF, and to load them.
A2: Program
・・・
To write-in the project files automatically produced
【
Offline
】
With the switch of the FM-ONE body
B:
Write
・・・
To write in project files saved in the CF by operating the
switch of the FM-ONE body.
When user programs prepared with the MOT/HEX file format are to be used, the above five files must be
prepared as a project using FM-ONE Project File Maker. Writing is not possible by putting MOT/HEX file alone in
the CF.
Online operation: A1 and A2 and Offline operation B mentioned above will be described in the following page and later.
FM-ONE
CF
PC
Project
MCU
Target
A1: Save
Load
B:
Write switch
A2: Program
Direct write-in
A1: Save
/Load
Save
･･･
To produce project files
from selected files and
parameters,
and
save
them.
Load
･･･
To call projects that are
already
saved.
It
is
possible to directly write
what is loaded, or modify
the contents and save
them.
Program
･･･
To start writing projects
with PC.
After a message
“Start
writing
”
is
given,
communication
between
PC and FM-ONE turns to
an offline mode. When
writing is finished, it returns
to an online mode.