HOKUTO DENSHI
CO;LTD;
FLASH2
株式会社
9
□
Verify
The optional verify can be
selected in this menu.
This verify is started after programming
complete. The data transfer to PC and
compare with the loaded file data. This
verify is different from the Hitachi
Flash memory MCU on-board
programming ordinary flow. The
prescribed verify in programming is
done without select this verify. The
result must be used by the user
’s own
decisions.
Programming Log File
No Optional Verify
Only in programming, data is verified in
prescribed byte unit.
Comparing by check sum
After programming, data is verified by
check sum.
Note)If 2 files are selected,
check sum are showed in each.
In the use of
some MCU, Comparing by check sum cannot
be selected.
Comparing by byte unit.
After programming, data is verified by
byte unit.
Because, at the beginning of the boot
mode, the on-chip ROM is all-erased
automatically, it is impossible to verify
without programming.
Check the box if programming log file is
required.
Programming Log File
The file format is text at default with extension is
“.log” if there is no description in the file
information box.
□
Display Language
Select the display language from Japanese and English
All the parameters are saved when the control software are closed.
File Loading
□
Open/Close
To load the file for programming, select
“Open” from
the pull down menu in
“File”.
The MOT/HEX file
must be named
“.MOT/HEX” as its extension.
We recommend loading the file after the MCU setting.
Close the file before changing the MCU type.
The demo programs in the enclosed CD are useful as the sample MOT/HEX files. Please copy from the CD if you need.
If the date address error of the loaded program is indicated at the file load, we recommend to examining the programs not
to fail in the generation with the proper link, confusing with RAM address etc. In the on-board programming, the user
programs transfer into on-chip ROM only.
□
Secondary file
Some MCU have secondary mat in its on-chip ROM like
“user boot mat” of H8/3069R. If the MCU type is selected
from MCU list that can be able to use secondary mat,
“User
boot mat Open/Close
” and secondary file box will be
automatically appeared.
For each mat, the program must be arranged form the begging.
□
Third file
Open
Cancel
Secondary
H8/3069R
On-chip ROM
User mat User boot mat
512KB 8KB
Check sum displays after
verifying
It is recommended to do Verify
to enhance the reliability of
the programming.
When the MCU which has the user boot mat and the
date flash was selected, the file menu and the file
information box is indicated as follows.
User Mat(primary)
User boot mat(secondary)