BA_PH_546-100_EN_06-22.docx
42
11.7.2
Warnings
Warnings are signalled by a yellow, flashing warning triangle (see left). If the symbol is tapped, the
"
Warning
" window appears with a yellow background and the corresponding information.
Figure 51: Warning 1
Figure 52: Warning 2
Cause:
Fence and/or extraction
are in the unacceptable
range.
Remedy:
Move fence and/or
extraction into the
permissible range.
•
With these warning messages, only surface planing (on top of the planing table) is possible.
•
The function
“
thicknessing
”
is therefore not possible because the feed cannot be started.
•
To be able to thickness-plan workpieces > 315 mm, the fence must be completely closed.
Further (non-control-relevant) operating faults are described in the chapter
