ODP 20-4
2,000 Lb. Four Drum Puller
- - 12 - -
© COPYRIGHT 2016 HOGG & DAVIS, INC
Drawbar inspection
Regularly inspect he drawbar for wear and damage. If
wear exceeds 1/8”, replace the drawbar eye.
Check all drawbar mounting fasteners for proper torque
Do not modify or add to the product
Do not weld on this product without written permission
from the factory
Be sure the drawbar size is compatible with the coupling
device on the tow vehicle
Do not damage the coupling components. Be
particularly careful during coupling and uncoupling
Inspect the coupling device on the tow vehicle for proper
locking prior to use
Consult OSHA and DOT regulations and American
Trucking Association guidelines for complete operating
procedures.
Summary of Contents for ODP 20-4
