Hog Technologies Stripe Hog SK3000, Operation Manual

Page: 95 / 108

95
Check Lists
1. Turn the tractor 40K PSI switch “OFF”.
2. Raise the Hog Head to the full “UP” position.
3. Turn all the switches on the control panel to “OFF” and the speed dial to “0”.
4. Stop the tractor near the truck so there is slack in the hoses.
5. Turn the throttle on the SK3000 engine to idle speed, disengage the PTO, and
allow the engine to run for several minutes to cool internal components.
6. Turn the SK3000 engine off and disconnect the hoses, if necessary, from the trac -
tor.
7. Load the tractor. Make sure the tractor is properly secured before traveling. Refer
to Tractor Loading and Unloading in Section 3.1 (Tractor Operation) in this manual
for more information on loading and properly securing the tractor.
8. Raise the ramp and make sure it is properly secured with the safety pin.
9. Properly store or secure all hoses and make sure the booms are properly secured
for travel.
Shutdown Procedure Shutdown Procedure