Hog Technologies PAINT HOG, Operation Manual

Page: 72 / 87

72
Section 4 - General Maintenance
4.7 Water Heater & Burner
Maintenance (Optional)
The water heater oil burner is powered by the 12
volt electrical system and supplied fuel from the
truck fuel tank. It requires little routine mainte-
nance except for daily inspections for fuel leaks,
loose components and for proper operation. The
fuel supply line is equipped with a fuel filter that
should be changed whenever the auxiliary engine
fuel filter is serviced.
You should perform all recommended maintenance
according to the manufacturer’s recommenda-
tions. Maintenance schedules and procedures are
outlined in the oil burner manual. They should be
followed exactly.
Daily Inspection and Maintenance
• Check the antifreeze fluid level.
•
Inspect water heater mounting bolts and
mounting hardware. Tighten or replace as
required.
• Check fuel oil supply lines and fittings to verify
there are no leaks.
• Check water hoses and fittings for leaks, dam -
age and chaffing.
Monthly Inspection and Maintenance
• Observe combustion air openings and vent
system for integrity. Openings must be clean
and free of obstructions.
• Check oil lines and fittings to verify there are
no leaks.
• Observe burner ignition and performance to
verify smooth operation.
NOTICE:
SHUT THE SYSTEM DOWN IF YOU OBSERVE ABNORMAL OR
QUESTIONABLE OPERATION. CALL A QUALIFIED SERVICE
AGENCY FOR PROFESSIONAL INSPECTION AND SERVICE.
Paint Heater Reservoir & Burner