Hog Technologies PAINT HOG, Operation Manual

Page: 66 / 87

66
Section 4 - General Maintenance
4.4 Paint Filter Maintenance
The paint filters should be flushed anytime paint
delivery begins to slow or becomes clogged. If
flushing does not return paint flow to an accept -
able level, the filter strainer will need to removed
and cleaned.
Flushing Filters
1. Make sure the water tank is pressurized.
1.
Close the supply valve on the inflow side of the
filter. Then close the paint gun supply valve on
the outflow side.
2. Place a bucket below the drain valve that is
large enough to hold the volume of paint in
the filter.
3. Open the drain valve and drain paint.
4. When the paint has drained, open the water
supply valve at the filter and flush the strainer
until water runs clear
5. Close the water valve.
Drain Valve Assembly & Clamp
Paint Filters, Supply Valves, Water Valves & Drain Valves
1. Paint Filters 2. Water Valves 3. Supply Valves 4. Drain Valves
4
2
3
1
1
3
3
3
3