Hog Technologies PAINT HOG, Operation Manual

Page: 49 / 87

49 49
Section 2 - Paint Hog Systems
2.18 Access Panels,
Ladders & Tool Boxes
Ladders
Ladders on each side of the deck provide access to
the tanks, air compressor and other components
located on the deck. Each ladder is hinged and has
a spring loaded safety pin that locks the ladder in
the stored position.
To use the ladder, release the safety pin and swing
the ladder down to the deployed position. Return
the ladder to the stored position and secure it
with the safety pin when service or inspections
are complete.
Tool Boxes
Heavy duty, lockable tool boxes are located on
each side of the rear control station. The tool
boxes are used for storing nozzles, extra parts
and tools. Always make sure the tool box doors
are closed, latched and locked before operating
the truck.
CAUTION
ALWAYS MAKE SURE THE LADDERS AND TOOL BOX
DOORS ARE LATCHED IN THE STORED POSITION BEFORE
OPERATING THE TRUCK. THE LADDER AND OPEN TOOL
BOX DOORS STICK OUT FROM THE SIDE OF THE VEHICLE
AND CAN CAUSE DAMAGE TO THE TRUCK OR OTHER
VEHICLES IF THEY ARE NOT PROPERLY STORED OR
CLOSED FOR TRANSPORT.
Tool Box
Ladder Deployed
Ladder Stored & Locked With Safety Pin