monty 4400
Betriebsanleitung Operator’s Manual Notice d’ utilisation
Modéle :
monty 4400
_D _GB _F - Release D
HOFMANN behält sich das Recht zu Änderungen ohne Vorankündigung vor _ HOFMANN reserves the right of modification without notice _ Document non contractuel
42
5.4
DEMOUNTING DUPLEX AND SUPERSINGLE TUBE-
LESS TRUCK TIRES (OVER 13" WIDE)
NOTE:
FOR THIS OPERATION THE MOUNT/DEMOUNT TOOL IS
REQUIRED.
1.
Break the bead of the tire as described in
#5.2.1.- 5.2.6.
2.
For this type of tire it is not possible to demount
both beads at the same time as described in
#5.2.7.
Engage the hook of the mount/demount tool be-
tween the bead and the rim.
3.
Lift the chuck arm enough to clear the hook 2-3
cm (1"-1"1/2) from the rim flange. Move the
mount/demount tool towards the outside. This
will allow you to place the long bar in between
the bead and the rim flange for necessary pry-
ing (Fig.30).
418
Fig.30
4.
Rotate the chuck counter clockwise until the
outer bead is completely demounted (Fig.31).
585
Fig.31
5.
Demount the inner bead with the bead breaker
disc, as described in @5.2.7. (Fig.32).
580
Fig.32
