Operating and Maintenance Manual
44
©
HOFFMANN PP2-NCF
• Version 7.267 • 12-2017
21
Maintenance Schedule
To access the inside of the machine open
the rear sliding door.
Lubrication points - Locations of grease fittings
POS Location
Procedure
Lubricant
Frequency
Linear Bearings (THK-
type)
Fill grease fitting with
appropriate grease
Semi-Synthetic high performance multi-use
grease DIN 51825 / KP 2 P-30 (e.g.. ESSO /
Grease LT2) (kinematic viscosity at 40°C =
80mm²/s(cSt) - ISO-VG 68
ISO-VG 100
Every 3 months
or 500 hrs
–
whichever comes
first.
Linear bearings
Guide rod blocks
The guide rod bearings are
filled with grease at the
factory.
No additional lubrication is necessary
Maintenance free
Warning
– Safety Hazard!
Always disconnect electrical and
compressed air supply and follow
proper Lock-Out/Tag-Out procedures