Operating and Maintenance Manual
©
HOFFMANN PP2- NCF
• Version 7.267 • 12-2017
41
18
Faults – Errors - Emergencies
Only qualified and trained personnel
may perform troubleshooting and testing
procedures!
Person not involved with trouble
shooting shall remain a safe distance from
machine until normal operation is
restored.
In case of emergency press
Emergency Stop Button.
Activating the emergency stop button will stop
saw and router motors and return all
carriages back to their home positions.
The material clamping cylinders remain under
pressure and must be deactivated separately.
Emergency Stop reset
Upon activating the Emergency Stop
Switch (1) follow these steps to re-set
the machine controls:
1. Release red E-Stop button (1).
2. Switch on machine control panel (2).
WARNING!
Shutting off machine or disconnecting
electrical power supply will not
disconnect compressed air supply.
Pneumatic circuit remains under
pressure even when main power
switch is switched-off and locked!
2
1