Operating and Maintenance Manual
©
HOFFMANN PP2- NCF
• Version 7.267 • 12-2017
33
16
Operation – Warnings and Safety Rules
Additional hazards exist during set-up and maintenance work,
including:
Cutting and Amputation Hazard!
Router bits are sharp and can cut fingers
easily.
Saw blades are sharp and can cut and
amputate fingers easily.
Never reach into cutting areas during
operation!
Entanglement and Pinching Hazard!
When safety covers, shields, guards or
access panels are open during set-up and
maintenance additional dangers of
entanglement and/or pinching hazards on
rotating components (belts, sprockets, etc.)
may be present.
Do not wear loose fitting clothing
– always
cover long hair with a hair net.
Follow all safety rules during set-up and
maintenance work.
Only trained and authorized personal
may perform set-up and maintenance
work.
Control parameters are adjusted at the
factory for optimal performance and may
not be changed or tampered with.
