![background image](http://html1.mh-extra.com/html/hoffmann/megaplan-megaspin/megaplan-megaspin_use-and-maintenance-manual_2144175019.webp)
19
Ver. 04-2015
Use and Maintenance Manual
ENGLISH
Use of the wheel balancing machine
6.2 CORRECTION MODE SELECTION
Press
from the unbalance measurement screen.
Press the weight symbol in the desired correction position.
If doing the unbalance correction in static mode only, press and hold the outside adhesive weight symbol
for once or twice (depending on the current correction mode).
Goes back to the unbalance measurement
screen, automatically recalculating the
unbalance values.