HOFFEN GS-1231, Instruction Manual

Page: 29 / 37

3
29
7.4 Brush attachment installation/removal
CAUTION!
Do not install/remove the attachment when the device is hot, as
there is a risk of scalding.
CAUTION! Only install the attachment when the device has fully cooled down
and is disconnected from the mains.
1. Make sure the device is disconnected from the power source.
2. Grab the device by the handle, install the attachment with the other hand. Make
sure the tabs on the attachment inner side enter into the openings around the
steam plate.
3. Make sure the tab used for prying and removing the attachment is pointing up.
4. To remove the attachment, pry the tab and take the attachment off.