HOFFEN
EN
HOFFEN
23
BLENDING OF INGREDIENTS
It is best to start filling the container by pouring in the liquid. Only then put the
remaining ingredients, additives, spices, etc. into it.
Do not exceed the MAX indicator on the container when filling.
Check that the gasket in the mixing cap is correctly fitted. If not, insert it properly or
reposition it. Screw the mixer cap firmly onto the container Shake and check for
leakage. Plug the power cord of the motor base into the power outlet. Invert the mixing
cap container so that the cap is at the bottom.
Insert the cap into the socket on the base so that the drive elements interlock and the
flaps of the container enter the appropriate holes around the socket. Gently turn the
container with the cap to the right until it locks into the base - one of the wings unlocks
the possibility of turning on the power. Start mixing by selecting the desired speed or
pulsating mode with the operating mode selector knob (0 - device off, P - pulsating
mode, 1 and 2 - stainless steel blade rotation speed selection). Mix the contents until
the desired level of fineness or consistency is reached. Remove the container with the
cap from the base by unscrewing it to the left so that the wings slide out of the safety
catch. Turn the container upside down with the mixer cap and untwist it. Remove the
mixing cap gently, preferably over a worktop or sink, as the inside and the blades in the
cap can drip off the rest of the mixed content. Place the cap in a safe place,
remembering about the stainless steel blades in the cap.
STORAGE AND HANDLING OF CONTAINERS WITH CONTENTS
You can drink the contents of a container or pour it into another container of your
choice. You can also twist on the container a cover with plug and handle, which allows
you to store the content or take the blended mix with you, to your car, bag, for a walk,
gym, etc. In this case, you can drink through the opening after removing the plug or
after unscrewing the cover. Before tightening and carrying the whole unit, check that
the gasket is correctly attached to the cover. If not, insert it properly or reposition it.
9. CLEANING AND MAINTENANCE
CLEANING OF THE EQUIPMENT COMPONENTS
Regular and proper cleaning and maintenance will ensure a long service life and
trouble-free operation of the equipment.
Cleaning and maintenance may only be carried out when the appliance is switched
off and unplugged.
Carry out all the steps gently, careful not to damage the kit components and not to
cut yourself with sharp edges of the stainless steel blades.