HOFFEN
EN
HOFFEN
21
Bottom side of the posture:
8. USE
Before replacing elements of the device or approaching moving parts, turn off the
equipment and disconnect from the power supply.
Carry out all the steps gently, careful not to damage the kit components and not to
cut yourself with sharp edges of the cutting blades.
Before and after work, check each component for signs of damage. Damaged
components must not be used, as this may cause damage to the user's body.
Do not use the unit to crush very hard foods such as frozen products, bones, nutmeg,
cereals, coffee beans, etc.
The device can shred ice if it is in cubes of a total weight of up to 50g, if not clumped
into larger pieces. Clamped cubes should be separated before mixing. We recommend that
you add the ice to the containers in a crushed form. Ice can only be added to liquids,
previously prepared and poured into a container. For shredding ice cubes in liquid you can
only use pulsating mode.
Do not put ing
redients in containers or pour liquids over 80°C as this may damage
the containers, the mixing cap and the caps.
Do not turn on the device with empty containers attached - you may damage the
motor of the device.
Power cord
Drainage hole
Anti-slip feet
Anti-slip feet
Motor ventilation