32
GB
is enough desclaing agent in the outer tank, to which the level sensor is connected (the level sensor must be installed independently,
taking into account the corresponding value in the table below). During the descaling process (cycle time more than 60 minutes), diode
F
lights up on the display and the digits indicating its subsequent stages will appear:
0.
Water drain.
1.
Re
fi
ll.
2.
Dosing of descaling liquid.
3.
Descaling process.
4.
Water drain below the bottom electrode.
5.
Complete emptying,
PL Tank
fl
ushing.
The descaling process cannot be interrupted.
In the automatic descaling mode, in case of a power failure, the system will perform a
fl
ushing process after restarting the generator and
after 90 minutes of inactivity, the descaling process.
In manual descaling mode, in case of a power failure, the system will lock the keypad and perform a
fl
ushing process after restarting the
generator.
Name No.
Item
Approximate fluid consumption during the descaling cycle
HOESCH 6
68230
~ 0.9 L
HOESCH 12
68231
~ 1.4 L
HOESCH 21
68232
~ 1.8 L
No.
Water hardness level
[mval / l]
[mg CaCO3]
[°dH]
[mmol/l]
Hoesch descaling:*
(in hours)
1
Softened water
< 0.54
< 26.8
< 1.5
< 0.27
< 60 h
2
Soft water
0.54 to 4
26.8 to 200
1.5 to 11.2
0.27 to 2
< 40h
3
Medium-hard water
4-7
200-350
11.2 to 19.6
2 to 3.5
< 20 h*
4
Hard water
7-11
350-550
19.6 to 30.8
3.5 to 5.5
** essential use of softened water
5
Very hard water
> 11
> 550
> 30.8
> 5.5
** essential use of softened water
*
The use of a water softener is recommended.
**
use of a water softener is necessary
The descaling process is carried out automatically after 8 hours of operation – factory setting. According to the result of the water
hardness test cycle can be adjusted every 1-99 hours.
15
Correct use of the steam bath
First shower and then steam.
Before each steam bath, take a shower, wash yourself thoroughly with soap and dry yourself.
When the desired temperature is reached, enter the steam cabin and close the door.
Be careful with direct skin contact in the area of the steam outlet!
15 minutes is enough!
The
fi
rst steam bath is only as long as you feel comfortable.
We recommend max. 15 minutes at 40 to 50 °C. It is perfect to sweat while sitting.
Precise steam dosing.
Not more than 2 to 3 steam baths.
Evaporation is pleasant-smelling.
Refreshing scents make the Roman sauna soothing. To increase the steam effect, it is possible to
add HOESCH scents to the steam nozzle container or with an aroma dosing pump (special auxiliary equipment).
Cold shower and warm shower.
Towards the end of the steam bath: a cold shower. This improves form and refreshes. You will feel
like a “newborn” person. A hot shower relaxes after a steam bath and a short rest period is necessary.
Relax in peace.
Lie down, rest, relax – in this way the Roman sauna has a calming effect and brings relief.
The steam is relaxing.
The great advantages of the Roman sauna are its gentle temperature of 40 to 50 °C and the perfect
combination of heat and humidity. Fitness, health and beautiful skin are within the reach.
If children use a steam bath, it is necessary to ensure their continuous supervision by adults.
Special care is recommended when using the steam bath for the elderly or for people with reduced mobility.
Summary of Contents for 68230
Page 51: ...FR 51...
Page 115: ...RU 115 40 50 16 WT3a 4 4a FI FI 1 E2 E3 E4 E5 E6...
