Step
Charging the Zig Zag Battery
Note:
Never charge a hot battery or a
battery that is already charged. Always
discharge before every charge. See Step 3
for instructions on discharging.
See "Warnings and Safety" on page 24.
The charger supplied with the Zig Zag Racer
3
™
, the HobbyZone
®
variable rate DC peak
charger, uses unique peak detection circuitry
that ensures an accurate charge every time
and protects your Ni-Cd and Ni-MH batteries
from the dangers of over-charging. This
charger continually monitors the battery’s
charge curve and automatically stops
charging when the peak charge is detected.
The peak detection charger will help avoid
damage to your Ni-Cd and Ni-MH cells.
1. Plug the battery into the charger.
2. Plug the charger into any 12V automobile
accessory outlet. The LED indicator should
continuously blink. Charging is finished
when the LED glows steadily (in 40 min-
utes or less).
Summary of Contents for Zig Zag Racer 3
Page 2: ...Instruction Manual ...
