Propeller/Shaft Replacement
20
If you damage the propeller, you may need to
purchase a replacement propeller/propeller
shaft. Follow these steps to replace the
propeller. Adult supervision is recommended.
1. Remove the canopy by unhooking the
rubber band that attaches the canopy to
the hull.
2. Use a small flathead screwdriver to loosen
the black setscrew that secures the rudder.
3. Remove rudder carefully and make certain
not to lose the two spacers that allow the
rudder to move freely.
4. Remove the 4 small Phillips screws that
secure the front of the plastic deck cover
and the antenna.
5. Push the antenna out of your way.
6. Pull up on the top (front) of the plastic
deck cover to reveal the motor and drive
shaft coupler.
7. Remove the two screws that secure the
motor bracket. Carefully pull the motor
out, making certain not to accidentally
detach the motor leads from the solder
joints.
Note:
The motor is secured to the hull with
aggressive servo tape, so it may take a small
amount of force, as well as prying with
a screwdriver, to free the motor.
8. When the motor is free, pull the motor
out and remove the rubber drive shaft
coupler. This should expose the drive
shaft coupler cap.
Step 6 —Fold
Step 7 —Remove Motor Scr
ews (2 )
Step 4 —Remove Screw (4 )
Step 2 —Remove Screw
Rudder Arm
Antenna
Motor Bracket
Summary of Contents for Zig Zag Racer 3
Page 2: ...Instruction Manual ...