- 21 -
GB
1.2
TECHNICAL CHARACTERISTICS
STRUCTURE
Stainless steel frame AISI 304, stainless steel panels and base mounted on height-adjustable feet.
TOP
in stainless steel AISI 304 seal tight.
GRILLS
in porcelained cast iron, high-temperature resistant.
BURNERS
in chromate or enamelled cast iron flame-spreader made of brass with stabilised fire, ignition by pilot flame, fixed
nozzles for various types of gas.
GAS COCKS-THERMOSTATS
in pressed brass, supplied with safety valve and thermocouple for automatic interruption of
gas flow in case of accidental pilot extinguishment.
CONTROL KNOBS
in heat-insulated material.
1.3
OVEN
COOKING CHAMBER
in high-temperature and acid resistant porcelained steel or enamelled steel , with internal dimensions
complying to GASTRONORM 2/1. Thermal insulation with high-density glass wool. Grill’s lateral supports made of chromate
steel bars, easily extractable for cleaning. Grill made of chromate steel bar.
OVEN DOORS
with double panelling and insulating glass wool interspace, door headers of stainless steel, handles in satin
steel mounted on athermal supports, and door seal. Balanced spring hinges.
1.4
GAS HEATING
Stainless steel burner with self-stabilising flame. Thermostat adjustable temperature 150÷290°C with safety valve and
thermocouple for automatic gas interruption in case of accidental pilot extinguishment.
Piezoelectric ignition of the oven’s “Targhet” pilot.
1.5
ELECTRICAL HEATING
Electrical resistors reinforced in stainless steel are located in the cooking chamber.
Selector switch with 50÷300°C thermostat and the following functions:
- Oven ignition
- Full oven heating 5300 W
- Lower resistor 3800 W
- Upper resistor 1500 W
Signal lamps indicating whether the oven/grill is on and the thermostat needs heating increase.
1.6
GAS SOLID TOP
COOKING PLATE
in cast iron
with high thermal conductivity.
GAS HEATING
by means of self-adjusting flame burners made of stainless steel, guaranteeing highly uniform plate heating.
Thermostat temperature control with safety valve and thermocouple to cut off the flow of gas if the pilot burner is accidentally
extinguished. Piezoelectric ignition of the pilot “targhet”.
.
Summary of Contents for G2SDM77
Page 94: ... 94 fig 1 fig 2 fig 3 fig 5 fig 4 X 4 8 4 8 7 ...
Page 97: ......
