HMS Intesis IBMBSKNX1000000, User Manual, Page: 12 / 18

Intesis
TM
Modbus Server - KNX
User Manual r1.2 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL http
s
://www.intesis.com
12 / 18
5
Set-up process and troubleshooting
Pre-requisites
It is necessary to have a KNX installation, device or interface operative and well connected to the corresponding KNX
port of Intesis and a Modbus RTU slave or Modbus TCP client connected to their corresponding ports as well.
Connectors, connection cables, PC to use the configuration tool and other auxiliary material, if needed, are not
supplied by HMS Industrial Networks S.L.U for this standard integration.
Items supplied by HMS Networks for this integration are:
•
Intesis gateway.
•
Link to download the configuration tool.
•
Product documentation.
Intesis MAPS. Configuration & monitoring tool for Intesis KNX series
5.2.1 Introduction
Intesis MAPS is a Windows
®
compatible software developed specifically to monitor and configure Intesis KNX series.
The installation procedure and main functions are explained in the
Intesis MAPS User Manual . This document can
be downloaded from the link indicated in the installation sheet supplied with the Intesis device or in the product
website at
www.intesis.com
In this section, only the specific case of Modbus to KNX systems will be covered.
Please check the Intesis MAPS user manual for specific information about the different parameters and how to
configure them.
5.2.2 Connection
To configure the Intesis connection parameters press on the Connection button in the menu bar .
Figure 5.1 MAPS connection