HMS Anybus HMS-EN2MB-R, User Manual, Page: 53 / 72

Appendix E: CIP Objects 51 (70)
Device Status
Bit(s)
Name
0
Module Owned
1 (reserved)
2 Configured
This bit shows if the product has other settings than "out-of-box".
3
(reserved)
4... 7 Extended Device Status:
Value:
Meaning:
0000b Unknown
0010b Faulted I/O Connection
0011b No I/O connection established
0100b Non volatile configuration bad
0110b Connection in Run mode
0111b Connection in Idle mode
(other) (reserved)
8 Set for minor recoverable faults.
9
Set for minor unrecoverable faults.
10
Set for major recoverable faults.
11
Set for major unrecoverable faults.
12... 15 (reserved)
Service Details: Reset
There are two types of network reset requests on EtherNet/IP:
Type 0: Power Cycling Reset This service power cycles the module.
Type 1: Out of box reset This service sets an “out of box” configuration (all configuration data will be erased) and performs a
reset.
E.2 Message Router (02h)
Category
Extended
Object Description
The Message Router Object provides a messaging connection point through which a client may address a
service to any object class or instance residing in the physical module.
In the HMS-EN2MB-R module it is used internally to direct object requests.
Supported Services
Class:
-
Instance:
-
Linking Device User Manual
scm-1202–181 2.0 en-US