manualshive.com logo in svg

HMS Anybus ABC4011, User Manual, Page: 26 / 60

Share
Download
HMS Anybus ABC4011 User Manual Download Page 26

6.4. Communicator Built-In Web Interface Overview

Use the Communicator built-in web interface to configure, maintain and troubleshoot the Communicator.

Figure 13. The Communicator built-in web interface Home page

Menu item

Description

Home

View the Communicator, network and node status.

Apply

After configuration changes are made and verified, press Apply to make the settings take effect.

EtherNet/IP

Configure the network settings for the EtherNet/IP network.

Modbus TCP

Configure the network settings for the Modbus TCP network.

I/O configuration

Configure input and output data sizes and endian conversion.

Files & firmware

Save settings in a configuration files, upload configuration files and upgrade firmware.

Diagnostics

Monitor and troubleshoot the Communicator.

Support

Contains Communicator product information, Anybus contact information, link to Anybus support website, and
product file for download.
Here you can generate a support package with product information, to send to your Anybus support technician.

Anybus

®

 Communicator

™

 - EtherNet/IP

™

 Adapter to Modbus TCP Server

Communicator Built-In Web Interface Overview

Page 22 of 56

SCM-1202-196 Version 1.0

Summary of Contents for Anybus ABC4011





























































Reviews:

No comments