About the Anybus X-gateway CANopen
10
Doc.Id. HMSI-168-91
Anybus X-gateway CANopen - PROFINET
Doc.Rev. 2.10
2.5 USB Connector
At the bottom of the module, next to the CANopen connector for the secondary net-
work, you find a USB connector that is only used for software upgrade of the module.
This port can only be used for software upgrade.
2.5.1 Power Connector
Notes:
• Use 60/75 or 75
º
C copper (CU) wire only.
• The terminal tightening torque must be between 5... 7 lbs-in (0.5... 0.8 Nm)
See also...
- “Power Supply” on page 45
Pin no.
Description
1
+5 V input
2
USBDM (USB communication signals)
3
USBDP (USB communication signals)
4
Signal GND
Housing
Cable Shield
Pin no.
Description
1
24 V DC
2
GND
1
2
3
4
1
2
Summary of Contents for AB7307
Page 55: ......
