Doc.Id. HMSI-168-91
Anybus X-gateway CANopen - PROFINET
Doc.Rev. 2.10
Chapter 2
2. About the Anybus X-gateway CANopen
2.1 External View
A: Status LEDs
See also...
- “Status LEDs” on page 7
B: Primary Network Connectors and Switches
This connector (connectors) and, if available, these
switches are used to connect the Anybus X-gateway
CANopen module to the primary PROFINET net-
work and to configure that interface. They are de-
scribed in “Primary Network” on page 8.
C: USB connector
This connector simulates a COM-port, used for soft-
ware upgrade of the module. Please note that this
connector can not be used for configuration of the
module.
See also...
- “Secondary Network” on page 9
D: CANopen Connector
This connector is used to connect the gateway to the
secondary CANopen network.
See also...
- “CANopen Connector” on page 9
E: Power Connector
This connector is used to apply power to the gateway.
See also...
- “Power Connector” on page 10
F: DIN-rail Connector
The DIN-rail mechanism connects the gateway to PE (Protective Earth).
See also...
- “Hardware Installation” on page 11
A
B
C
D
E
F
Summary of Contents for AB7307
Page 55: ......