Anybus X-gateway CANopen - PROFINET
5
Doc.Id. HMSI-168-91
Anybus X-gateway CANopen - PROFINET
Doc.Rev. 2.10
if needed. The master on the primary PROFINET network can see the status of the secondary CAN-
open network in the corresponding status word.
The amount of data that shall be exchanged, and the use of the control- and status functionality, is spec-
ified separately for each application. This means that even though up to 510 bytes of data can be for-
warded to an interface, the amount of data that will actually be exchanged on the primary PROFINET
network is determined by settings of the secondary CANopen network, with consideration taken to the
limits of the interface.
The available control- and status functionality is described in “Data Exchange” on page 24. Also note
that the terminology and definitions used for different types of data vary greatly between different net-
working systems. All data transported through the Anybus X-gateway CANopen is fast, cyclic data and
is simply referred to as ‘I/O Data’ in this document.
Summary of Contents for AB7307
Page 55: ......
