HMS Networks Intesis BACnet, User Manual, Page: 39 / 46

Intesis
TM
BACnet Server
– PROFINET
User Manual r1.0 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL http
s
://www.intesis.com
39 / 46
8.
Status LEDs and push buttons
LED Colour Indication
Run Off No power
Green Device powered and working.
Error Off No error
Red Error
Port A (Tx/Rx)
– BACnet
Off There is no activity on this port.
Tx - Blinking green Every data packet sent to the network it
blinks
Rx
– Blinking yellow
Every data packet received from an
slave device it blinks
Port B (Tx/Rx)
– Expansion Module
communication
Off There is no activity on this port.
Tx - Blinking green Every data packet sent to Expansion
module it blinks.
Rx
– Blinking yellow
Every data packet received from
Expansion module it blinks.
Button A
– BACnet
Off / Red On when link is detected:
- BACnetIP: ethernet is up & running,
the IBOX got an IP
- BACnetMSTP: token passing is
detected
Button B
– Expansion Module
communication
Off / Red It indicates the state of the Anybus
CompactCom internal FSM:
-
Steady: PROCESS_ACTIVE
- Blinking: WAIT_PROCESS
- Off: Other states
Push button Functionality
Button A
– BACnet
Sends to Broadcast I-Am message
Button B
– Expansion Module
communication
It doesn’t have any functionality. It can be configured from Intesis MAPS
software